Absolutely! I also recommend using case lube to prevent stuck cases. It makes a huge difference!
Next, when measuring your powder, start with published data. I usually prefer IMR powders for .257 Weatherby. Always wear safety glasses, folks!
Nice tip! What specific IMR powder do you recommend? I’m curious about the load data you’ve found effective.
For IMR, I’ve had great success with IMR 7828. It’s a little slower burning, which suits the .257 Weatherby well. Confidence in your load means everything.
Good to know! How about bullet seating depth? I’ve heard that can significantly affect accuracy.
3 Likes
Seating depth is critical! I suggest starting with the bullet manufacturer’s recommended depth, then adjust based on your setup. It’s all about finding that sweet spot!
Indeed! And don’t forget to check your crimp. Too loose or too tight can ruin your shot. Experiment a bit!
Exactly! A good crimp aids consistency. Funny story: once, my crimp was too loose, and my shot went sideways - literally!
Haha, that’s a good cautionary tale about crimping! Once you assemble, make sure to do a visual inspection before you head to the range. It’s worth it!
2 Likes
Absolutely, safety first! Always double check your loads against data, especially with high-performance cartridges like the .257 Weatherby.
Right on! Does anyone have specific load recipes they’d like to share? I’d love to compare notes.
I have a great load I use: 100 grain TTSX over 78 grains of IMR 7828 with a CCI 250 primer. Super consistent results!
4 Likes
Sounds solid! I’ll give that a try next. This thread has been incredibly helpful!
Safety is paramount when reloading, especially for something like the .257 Weatherby. Always wear safety glasses and work in a well-ventilated area. Check your powder and primers carefully before starting!
7 Likes
Absolutely! And don’t forget to keep a separate area for your reloading tools. Mixing them with other equipment can lead to accidents.
Great point, blove! Another thing to remember is to double-check your load data against trusted sources. Consistency leads to safer and more accurate rounds.
Exactly, and it’s also wise to keep a log of your reloading data and experiences. This can help avoid mistakes in the future!
If you’re new to this, it’s crucial to start with lower charges and work your way up. The .257 Weatherby is powerful; respect its capabilities!
1 Like
I agree with williamsonlinda. Also, remember to inspect every cartridge visually before using it. Any inconsistencies can lead to serious issues on the range.
Great advice! It’s easier to adjust loads up than to deal with an overpressure round!